0345 004 4040 support@telappliant.com

Welcome to the Customer Help Centre

For information relating to the use of products and services provided by Telappliant

    Sorry, we didn't find any relevant articles for you.

    Send us your queries using the form below and we will get back to you with a solution.


    Yealink W73P / W73B Setup for VoIPtalk

    1. Connect the base station power using supplied power adapter and the network cable. Please wait for it to boot up.
    2. Insert the battery into the handset and press Power Key ""  on the handset to power it up.
    3. Press Paging Key  "" on the base station. All the handset that registered to this base station will ring simultaneously and the screen will display the IP address of the base station..
    4. Enter the IP address  found in Step 3 into a web browser on a local PC.
    5. Login using your set credentials or using default credentials:
      Username: admin
      Password: admin


    6.  Select 'Account' from the sections on the left then 'Register'


    7. Select the account you wish to configure. For this example it is 'Account 1' from the drop down list.


    8. The following settings should be made by entering your VoIPtalk ID and password details: 
      Line Active: ON
      Label:
       <<VoIPtalk ID>> 
      Display Name: <<VoIPtalk ID>>  
      Register Name: <<VoIPtalk ID>>  
      Username: <<VoIPtalk ID>>  
      Password: 
      <<VoIPtalk password>>
      Server Host: voiptalk.org 
      Port: 5065 
      Enable Outbound Proxy Server: ON 
      Outbound Proxy Server 1: nat.voiptalk.org 
      Port: 5065 


    9. Click 'Confirm' to save settings

    10. Under the configured account, 'Registered' should be shown.


    11. Congratulations! Your phone should now be configured

    Was this article helpful?

    Still can't find what you are looking for?

    Our award-winning customer care team is here for you.

    Contact Support

    Powered by