0345 004 4040 support@telappliant.com

Welcome to the Customer Help Centre

For information relating to the use of products and services provided by Telappliant

    Sorry, we didn't find any relevant articles for you.

    Send us your queries using the form below and we will get back to you with a solution.


    Polycom Soundstation IP320 Setup

    1. Power up the phone.

    2. The IP address will be picked from the DHCP server on your network and will be displayed on the LCD.

    3. Open a web browser on your PC and type the SoundStations's IP address in the address field (make sure that your PC and SoundStation are on the same network).

    4. This will present you with the configuration web page for the IP320.

    5. Click on the SIP link. This will ask for your username and password.
      The Default Admin Username is Polycom and the Default Admin Password is 456.

    6. Enter the Outbound Proxy and Server 1 values as follows:
    7. Press the Submit button and it will save the settings and reboot the unit.

    8. When the phone has rebooted, click on Line link and enter the values in Identification section as follows:
    9. Press the Submit button and it will save the settings and reboot the unit.

    10. On rebooting, your phone should have connected to the VoIPtalk service. To test this dial 902. You should hear a confirmation message played back to you.

    Was this article helpful?

    Still can't find what you are looking for?

    Our award-winning customer care team is here for you.

    Contact Support

    Powered by