0345 004 4040 support@telappliant.com

Welcome to the Customer Help Centre

For information relating to the use of products and services provided by Telappliant

    Sorry, we didn't find any relevant articles for you.

    Send us your queries using the form below and we will get back to you with a solution.


    How do I set up my SIP Device

    Please note: this guide only refers to VoIPtalk account configuration. For VoIPOffice extensions, see the How To: VoIPOffice Administration section.


    Configuring any new SIP Device for the first time can be complicated, but you can make sure you have the correct details using the guide below.


    1. Sip details

     "Name or ID" (Example: userNAME, SIP ID, Authentication NAME etc) will be your VoIPtalk ID.

    "Password" will be the VoIPtalk Password.


    The VoIPtalk ID and password can be found when you log into your "voiptalk.org" account. The ID will be a number usually beginning with 844 (International users will usually have a number beginning with 8, then your country code, ie 833 for France). To find the password, click the VoIPtalk id; the password will appear in a popup.


    2. Proxy/registration details

    "SIP Sever/proxy/register domain" will be " voiptalk.org " (without the quotes)

    SIP port: 5060

    Outbound Proxy address/server: " nat.voiptalk.org " (Again, without quotes)

    outbound proxy port: 5065


    Please note that if you are configuring your VOIP details on an internet router, you will not normally require the outbound proxy


    3. PBXs

    If you are using a PBX that requires a sip.conf, use this template below:

    [VoIPTALK]

    host=voiptalk.org

    insecure=peer,invite

    secret=xxxxxxx

    type=peer

    username=voiptalkID

    disallow=all

    allow=ulaw&alaw

    allow=G.729

    outboundproxy=nat.voiptalk.org

    outboundproxyport=5065

    fromdomain=voiptalk.org

    canreinvite=no

    registersuffix=voiptalkID

    fromuser=voiptalkID


    Register:

    voiptalkID:voiptalkpassword@VoIPTALK/voiptalkID


    This should help you to configure most standard SIP Devices. However, if you need any help, you can contact Our support Team.

    Was this article helpful?

    Still can't find what you are looking for?

    Our award-winning customer care team is here for you.

    Contact Support

    Powered by