The following guide is for configuring a Yealink T21 with your VoIPtalk account.
You will need:
- The VoIPtalk ID – You can find it by logging to your VoIPtalk panel via the website voiptalk.org
- The VoIPtalk password – Go to the bottom of the page in case you need assistance with it.
- The Proxy / SIP server – "voiptalk.org"
- The Proxy port – "5060"
- The Outbound proxy server – "nat.voiptalk.org"
- The Outbound proxy port – "5065"
1-) Connect the handset and the computer to the same network using an Ethernet cable.
2-) Find the IP address of the handset by pressing Menu -> Status
3-) On a computer connected to the same router/network as the Yealink T21P phone, open the web browser and type the full IP address into the address bar.
4-) On the login screen that will appear, enter "admin" (Case sensitive) as both username and password.
5-) Once logged in, from the menu, select the "Account " tab, then "Account 1" from the drop down menu, enter the details below:
Display Name: Any name
Register Name: Your VoIPtalk Id
User Name: Your VoIPtalk Id
Password: your VoIPtalk account password
Enabled Outbound Proxy Server: Enabled
Outbound Proxy Server: nat.voiptalk.org Port: 5065
Server Host: voiptalk.org Port: 5060
Server Expire: 3600
The remaining should remain as default.
6-) Click "Confirm" to save and apply your changes.
7-) To check if the phone is registered, dial 902 from the handset. If you hear a congratulation message, then the registration was successful.
In case you are having issues getting your VoIPtalk ID and password, see below the way to retrieve them from your VoIPtalk control panel (login to www.voiptalk.org).
VoIPtalk ID: As shown on the screenshot above
Password: Found by clicking on your VoIPtalk ID and the following page should pop up, note that the arrow indicates where the password is shown: