0345 004 4040 support@telappliant.com

Welcome to the Customer Help Centre

For information relating to the use of products and services provided by Telappliant

    Sorry, we didn't find any relevant articles for you.

    Send us your queries using the form below and we will get back to you with a solution.

    Configuring a Grandstream GXP 2140 with VoIPtalk

    The following guide is for configuring a Grandstream GXP 2140 with your VoIPtalk account.

    You will need:

    • The VoIPtalk ID – You can find it by logging to your VoIPtalk panel via the website voiptalk.org 
    • The VoIPtalk password – Go to the bottom of the page in case you need assistance with it. 
    • The Proxy / SIP server – "voiptalk.org" 
    • The Proxy port – "5060" 
    • The Outbound proxy server – "nat.voiptalk.org" 
    • The Outbound proxy port – "5065"   

    1-) Connect the handset and the computer to the same network using an Ethernet cable.

    2-) Find the IP address of the handset by pressing the ‘OK’ button, then enter that IP address into the address bar of the connected computer; the following login screen should appear: 

    3-) Enter the username and password which are both ‘admin’ (case sensitive) by default.

    4-) Once logged in, the following page should load. Note that, initially, all SIP registrations will read ‘NO’ in a red bar as none have been configured or activated yet: 

    5-) Hover the mouse over the ‘Accounts’ tab and choose any empty account, this being account 1 for new users. Click directly on the chosen account to open configuration screen: 

    6-) Enter the following details:

    Account Active: Switch to ‘yes’ to activate the account

    Account Name: Enter the VoIPtalk ID

    SIP Server: Enter ‘voiptalk.org’

    Secondary SIP server: Leave as blank

    Outbound proxy: ‘nat.voiptalk.org’

    BLF server: Leave as blank

    SIP User ID: Enter VoIPtalk ID

    Authenticate ID: Enter the VoIPtalk ID

    Authenticate password: Enter the VoIPtalk password

    Name: Any name

    Voicemail user ID: Leave as blank 

    The rest should remain as default.

    7-) Click the ‘Save and Apply’ button and go to the ‘Status’ tab, if your configuration was successful, your account should be registered as a green ‘YES’ sign.

    Was this article helpful?

    Still can't find what you are looking for?

    Our award-winning customer care team is here for you.

    Contact Support

    Powered by