The following guide is for configuring a Yealink T46G with a VoIPOffice extension.

You will need:

• The VoIPOffice IP address – e.g. "77.240.xxx.xxx" 
• The Extension number – e.g. "1001" 
• The extension password/Secret (can be found by going to the edit mode of that specific extension, see the screenshot below) 

1-) Connect the handset and the computer to the same network using an Ethernet cable.

2-) Find the handset's IP address by pressing the "OK" button on the phone, this should be the first IP address that appears on the screen.

3-) On a computer connected to the same router/network as the Yealink T46G phone, open the web browser and type the full IP address into the address bar.

4-) On the login screen that will appear, enter "admin" (case sensitive) as both username and password.

5-) Once logged in, from the menu, select the "Account" tab, then select an account (e.g. Account 2) from the drop down menu and enter the details below:

Line Active: Set to enable

Label: The chosen extension number (e.g. 1001)

Display Name: Any name

Register Name: The chosen extension number

User name: The chosen extension number

Password: The extension's password (secret)

Server Host: The IP address of your VoIPOffice (e.g. 77.240.58.105)   Port: 5060

Server Expires: 3600

The rest should remain as default.

6-) Click "Confirm" to save and apply your changes.

7-) To check if the phone is registered, dial 902 from the handset. If you hear a congratulation message, then the registration was successful.